Ampala Baby Warmer


Ampala Baby Warmer

Specifications

Electrical Specifications 220-240 VAC, 50/60 Hz
Pulse Rate 10 to 250BPM
Pre heating mode Fixed at 30%
Temperature measurement accuracy ±-0.2°C
Skin probe accuracy ±0.1°C (Range 25° to 45°C)
Temperature display resolution ±0.1°C

Display specifications

  • Microprocessed Seven Segment LED display
  • Microprocessed Monochromatic Graphic Display Monitor 5.5" (OPT)
  • Microprocessed Colorful Graphic Display Monitor 8.4" (OPT)


Microprocessor control system

  • Three modes of operation
  • Skin or servo mode
  • Manual mode
  • Pre-heating mode
  • Skin or servo mode control range - 34°C to 38°C
  • Manual mode - Heater Output adjustable from 0-100% in 10% increments
  • Pre heating mode - Fixed at 30%
  • Auto test function performed at power on
  • Temperature measurement accuracy - ±-0.2°C
  • Skin probe accuracy - ±0.1°C (Range 25° to 45°C)
  • Temperature display resolution - ±0.1°C
  • Heating element - 560W
  • Heater warmup time at 100% power less than 2 mins
  • Auxiliary LED light


Physical characteristics

  • Height - 1886mm to 2086mm (Optional)
  • Depth - 1143mm
  • Width - 1000mm
  • Height -1800mm
  • Mechanical Light adjustment of bed in 3 steps by technical position
  • Two drawer storage system
  • Bed tilting - ± 12°
  • Continuous Electrical tilting - ± 12°(Optional)
  • Mattress - 65 X 45 X 5cm
  • Bearer Reel. for Wires
  • Auxiliary tray
  • Infusion pump stand
  • IV pole


Weighing scale specifications (OPT)

  • Range - 200 gms to 10kg
  • Accuracy: -±4gm


T-piece resuscitator specifications (OPT)

  • Manometer:-20 to 80cm 620
  • Maximum Pressure - 70cm 620
  • PIP - 5 to 70cm 820 @ 8LPM
  • PEEP - 2 to 10cm H20 @ 8LPM
  • Gas inlet floss range - SLPM (min) to 15LPM (max)
  • 02 concentration - 21% to 100% depending on the inlet gas source


Air Venturi Suction (OPT)

  • Range - 0 to 180mmHg
  • Accuracy: ± 5%


Blender (OPT)

  • Range - 21% to 100%
  • Accuracy - ± 3%


Bilitron 3006 BTB (OPT)

  • Integrated top surface phototherapy
  • Five super LED's
  • Irradiance - 30 to 40uw/crn2.nm


Bilitron Bed for Ampla

  • Integrated under surface phototherapy 8 super LED
  • Gel mattress
  • Irradiance - 30 to 45 uw/cm'.nm


Pulse Oxymeter (OPT)

  • Nelcore technology
  • Measurement range - SPO2 : 21 to 100%
  • Pulse Rate - 10 to 250BPM
  • SPO2 Accuracy - From 70 to 100%,°2 digits
  • Pulse rate
  • With motion: 05 digits


Environmental conditions (OPT)

  • Operating temperature -19°C to 30°C
  • Operating humidity: 15% to 95% - No Condensative

Yes! I am interested



  • Explore More Products




Looking for "Ampala Baby Warmer" ?




Looking for Product Name ?